Power steering pump, steering rack for MERCEDES-BENZ CLK
Installation side: front axle, bilateral
Dust protection: with dustproof edge
Inner diameter: 32
Material: NBR (Nitrile Butadiene Rubber)
Outer diameter [mm]: 44
Shaft seal type: V/AS
Width (mm): 9,5
Height [mm]: 26
Inner diameter 1(mm): 35
Inner diameter: 7
Outer diameter 1 [mm]: 78
Outer diameter [mm]: 81
Belt pulley: with ribbed V-belt pulley
Distance from pulley to pump [mm]: 30
Manufacturer limit: LUK
Number of ribs: 6
Observe service information:
Pressure pipe connection diameter [mm]: 16
Pressure [bar]: 110
Pulley [mm]: 129
Type of operation: hydraulic
Types of pumps: vane pump
Vehicle with left-/right-hand drive: for left/right hand drive
Manufacturer limit: LUK
Manufacturer limit: ZF
Observe service information:
Pressure [bar]: 120
Type of operation: hydraulic
Vehicle with left-/right-hand drive: for left/right hand drive
Attachment point diameter [mm]: 8
Distance between fixing holes [mm]: 90
Distance from pulley to pump [mm]: 30
Manufacturer limit: LUK
Number of ribs: 6
Observe service information:
Pressure pipe connection thread size: M16x1.5
Pressure [bar]: 110
Pulley [mm]: 130
Supplementary article / additional information 2: without compensation tank
Type of operation: hydraulic
Vehicle with left-/right-hand drive: for left/right hand drive
Attachment point diameter [mm]: 8
Distance between fixing holes [mm]: 104
Distance from adapter to pump [mm]: 35
Inlet pipe end diameter [mm]: 16
Manufacturer limit: LUK
Number of inputs/outputs: 2
Observe service information:
Pressure [bar]: 120
Replaceable part:
Thread size of return wire connection: M16x1,5
Type of operation: hydraulic
Vehicle with left-/right-hand drive: for left/right hand drive
Manufacturer limit: ZF
Number of ribs: 7
Pulley [mm]: 143
Type of operation: hydraulic
Replaceable part:
Type of operation: hydraulic
Replaceable part:
Type of operation: hydraulic
For steering gear manufacturer: ZF
Length 1 [mm]: 1128
Thread size axial joint: M14
Type of operation: hydraulic
Type of turning mechanisms: Rack and pinion rotation