Silent lever block for NISSAN INTERSTAR
- By car brand
- By VIN code
- According to the license plate
Inner diameter: 28
Installation side: at both sides
Installation side: from below
Installation side: front axle
Outer diameter [mm]: 55,2
Inner diameter: 28
Outer diameter [mm]: 55,5
Thickness [mm]: 74
Inner diameter: 28
Installation side: behind
Installation side: front axle, bilateral
Outer diameter [mm]: 55,2
Overall length [mm]: 79
Rudder type: Wishbone
Type of instalation: Rubber-metal support
Height [mm]: 74
Inner diameter: 28
Supplementary Article / Additional Information: without accessories
Type of instalation: Rubber-metal support
Vehicle with left-/right-hand drive: for left/right hand drive
Inner diameter: 28
Outer diameter [mm]: 55,2
Thickness [mm]: 79
Inner diameter: 28
Installation side: behind
Installation side: front axle lower
Outer diameter [mm]: 55,5
Required amount: 2
Thickness [mm]: 79
Weight, kg]: 0,600
Inner diameter: 28
Installation side: front axle lower
Installation side: front
Outer diameter [mm]: 55,5
Required amount: 2
Thickness [mm]: 74
Weight, kg]: 0,460
Installation side: behind
Installation side: front axle lower
Installation side: above
Installation side: at both sides
Installation side: front axle
Inner diameter: 22
Installation side: above
Installation side: front axle, bilateral
Internal thread [mm]: M10 x 1,5
Outer diameter [mm]: 64
Required amount: 2
Thickness [mm]: 60
Weight, kg]: 0,860
Width (mm): 113
