Crankshaft seal for SUZUKI JIMNY
- By car brand
- By VIN code
- According to the license plate
Dust protection: with dustproof edge
Inner diameter: 32
Installation side: front side
Material: FPM (Fluor-Kautschuk)
Outer diameter [mm]: 47
Shaft seal type: AS
Torsion type: right torsion
Width (mm): 6
Inner diameter: 32
Material: MVG (organosilicon rubber)
Outer diameter [mm]: 47
Shaft seal type: A SL
Torsion type: right torsion
Width (mm): 6
Inner diameter: 41
Material: FPM (Fluor-Kautschuk)
Outer diameter [mm]: 53
Shaft seal type: A SL
Torsion type: right torsion
Width (mm): 6
Dust protection: with dustproof edge
Inner diameter: 28
Material: FPM (Fluor-Kautschuk)
Outer diameter [mm]: 42
Shaft seal type: AS
Torsion type: right torsion
Width (mm): 5
Dust protection: with dustproof edge
Inner diameter: 41
Installation side: front side
Material: FPM (Fluor-Kautschuk)
Outer diameter [mm]: 53
Shaft seal type: AS
Torsion type: right torsion
Width (mm): 6
Inner diameter: 83
Material: FPM (Fluor-Kautschuk)
Outer diameter [mm]: 103
The form: A-shaped
Width (mm): 8
Inner diameter: 68
Material: MVG (organosilicon rubber)
Outer diameter [mm]: 86
Shaft seal type: A SL
Torsion type: left torsion
Width (mm): 8
Dust protection: with dustproof edge
Inner diameter: 68
Installation side: from the gearbox side
Material: FPM (Fluor-Kautschuk)
Outer diameter [mm]: 86
Shaft seal type: AS
Torsion type: left torsion
Width (mm): 8
Installation side: on the pulley side
Dust protection: with dustproof edge
Inner diameter: 83
Installation side: from the gearbox side
Material: FPM (Fluor-Kautschuk)
Outer diameter [mm]: 103
Shaft seal type: AS
Torsion type: left torsion
Width (mm): 8
Dust protection: with dustproof edge
Inner diameter: 80
Installation side: from the gearbox side
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylic rubber)
Outer diameter [mm]: 100
Shaft seal type: ASW
Supplementary article / additional information 2: with mounting shell
Torsion type: left torsion
Width (mm): 9
Dust protection: with dustproof edge
Inner diameter: 35
Installation side: front side
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylic rubber)
Outer diameter [mm]: 47
Shaft seal type: ASW
Supplementary article / additional information 2: with mounting shell
Torsion type: right torsion
Width (mm): 7
Inner diameter: 80
Material: ACM (polyacrylic rubber)
Material: PTFE (Polytetrafluorethylen)
Outer diameter [mm]: 100
Shaft seal type: A
Supplementary article / additional information 2: with mounting shell
Torsion type: left torsion
Width (mm): 9
Inner diameter: 35
Material: NBR (Nitrile Butadiene Rubber)
Material: PTFE (Polytetrafluorethylen)
Outer diameter [mm]: 47
Shaft seal type: A SL
Supplementary article / additional information 2: with mounting shell
Torsion type: right torsion
Width (mm): 7
