Ball bearing for VW VENTO
Installation side: front axle
Required amount: 2
Weight, kg]: 0,02
Installation side: front axle
Weight, kg]: 0,02
Installation side: front axle, bilateral
Rudder type: for wishbone
Cone size [mm]: 16,5
Cone slope: 1/10
Installation side: front axle, bilateral
Installation side: from below
Installation side: front axle, bilateral
Outer diameter [mm]: 19
Weight, kg]: 0,306
Cone size [mm]: 19
Installation side: at both sides
Installation side: front axle
Supplementary article / additional information 2: with reinforcing material
Supplementary Article / Additional Information: with accessories
Cone size [mm]: 19
Cone slope: /
Equipment option: PLUS KIT
Installation side: from below
Installation side: front axle, bilateral
Supplementary article / additional information 2: with reinforcing material
Installation side: from below
Installation side: front axle, bilateral
Required amount: 2
Supplementary Article / Additional Information: with additional materials
Weight, kg]: 0,376
Height [mm]: 64
Installation side: front axle
Length [mm]: 78
Thread size: Pinch Bolt 19mm
Width (mm): 70
Cone size [mm]: 18
Installation side: at both sides
Installation side: from below
Installation side: front axle
Cone size [mm]: 16,5
External thread [mm]: M12 x 1,50 RHT M
Installation side: at both sides
Installation side: from below
Installation side: front axle
Height [mm]: 82
Installation side: front axle
Length [mm]: 83
Thread size: M12x1.5
Width (mm): 79
Installation side: front axle, bilateral
Outer diameter [mm]: 19
Supplementary Article / Additional Information: with additional materials
Weight, kg]: 0,524
Installation side: front axle lower
Supplementary Article / Additional Information: with additional materials
Weight, kg]: 0,350
Cone size [mm]: 18
Supplementary Article / Additional Information: with accessories
Thread size: M12x1.5
Vehicle with left-/right-hand drive: for left/right hand drive