Ball bearing for HYUNDAI SONATA
- By car brand
- By VIN code
- According to the license plate
External thread [mm]: M12x1,25
Height 1 [mm]: 144
Mounting diameter [mm]: 43
Specification: pressed type
Cone size [mm]: 15
Cone slope: 1/8
Installation side: front axle, bilateral
Outer diameter [mm]: 40
External thread [mm]: M 14 x 1,5
Inner diameter: 12,2
Installation side: front axle, bilateral
Thread length [mm]: 19,5
Installation side: at both sides
Installation side: from below
Installation side: front axle
Installation side: at both sides
Installation side: from below
Installation side: front axle
Installation side: front
Overall height [mm]: 88,5
Supplementary article / additional information 2: with slotted nut
Height [mm]: 42
Installation side: front axle
Length [mm]: 80
Thread size: M10x1.25
Width (mm): 42
External thread [mm]: M12 x 1,25
Opening spanner width: 19
Required amount: 2
Weight, kg]: 0,34
Cone size [mm]: 15
Cone slope: 1/8
Installation side: at both sides
Installation side: from below
Installation side: front axle
Installation side: front axle
Thread size: M12x1.25
Cone slope: 1:8
Thread size: M10*1.25
Vehicle with left-/right-hand drive: for left/right hand drive
Cone size [mm]: 15
Cone slope: 1/8
Installation side: front axle, bilateral
Outer diameter [mm]: 40
Supplementary article / additional information 2: special mounting hardware required
Supplementary article / additional information 2: with reinforcing material
Thread size 1: MM12x1.5R
Cone size [mm]: 11,2
Cone slope: 1:8
Supplementary Article / Additional Information: with accessories
Thread size: M12*1.5
Vehicle with left-/right-hand drive: for left/right hand drive
Cone slope: 1:8
Thread size: M12*1.25
Vehicle with left-/right-hand drive: for left/right hand drive
Height [mm]: 76
Length [mm]: 150
Thread size: Pinch Bolt 18mm
Width (mm): 69,5
External thread [mm]: M14x1,5
Overall height [mm]: 94,4
Supplementary article / additional information 2: with reinforcing material
Height [mm]: 90
Length [mm]: 116
Thread size: M14x1.5
Width (mm): 50
Attachment point diameter [mm]: 12,2
Cone size [mm]: 18,1
External thread [mm]: M14 x 1,50 RHT M
Installation side: at both sides
Installation side: from below
Installation side: front axle
Number of fixing holes: 2
Required amount: 2
Rudder type: for wishbone
Supplementary article / additional information 2: without reinforcing material
Color: silver
External thread [mm]: M14 x 1,5
Inner diameter: 12,2
Installation side: at both sides
Installation side: front axle lower
Material: steel
Required amount: 2
Surface: galvanized
Thread length [mm]: 19,5
Weight, kg]: 0,66
Installation side: above
Installation side: front axle, bilateral
Required amount: 1
Cone size [mm]: 17,95
Cone slope: /
Installation side: from below
Installation side: front axle, bilateral
Supplementary article / additional information 2: with reinforcing material
Height [mm]: 110
Length [mm]: 116
Thread size: M14x1.5
Width (mm): 52
External thread [mm]: M14 x 1,5
Installation side: from below
Installation side: front axle, bilateral
Opening spanner width: 22
Weight, kg]: 0,772
