Ball bearing for HYUNDAI XG
Cone size [mm]: 15
Cone slope: 1/8
Installation side: front axle, bilateral
Outer diameter [mm]: 40
External thread [mm]: M 14 x 1,5
Inner diameter: 12,2
Installation side: front axle, bilateral
Thread length [mm]: 19,5
Installation side: at both sides
Installation side: from below
Installation side: front axle
Installation side: at both sides
Installation side: from below
Installation side: front axle
Installation side: front
Height [mm]: 42
Installation side: front axle
Length [mm]: 80
Thread size: M10x1.25
Width (mm): 42
External thread [mm]: M12 x 1,25
Opening spanner width: 19
Required amount: 2
Weight, kg]: 0,34
Cone size [mm]: 15
Cone slope: 1/8
Installation side: front axle, bilateral
Outer diameter [mm]: 40
Supplementary article / additional information 2: special mounting hardware required
Supplementary article / additional information 2: with reinforcing material
Thread size 1: MM12x1.5R
Cone slope: 1:8
Thread size: M12*1.25
Vehicle with left-/right-hand drive: for left/right hand drive
External thread [mm]: M14x1,5
Overall height [mm]: 94,4
Supplementary article / additional information 2: with reinforcing material
Height [mm]: 90
Length [mm]: 116
Thread size: M14x1.5
Width (mm): 50
Attachment point diameter [mm]: 12,2
Cone size [mm]: 18,1
External thread [mm]: M14 x 1,50 RHT M
Installation side: at both sides
Installation side: from below
Installation side: front axle
Number of fixing holes: 2
Required amount: 2
Rudder type: for wishbone
Supplementary article / additional information 2: without reinforcing material
Color: silver
External thread [mm]: M14 x 1,5
Inner diameter: 12,2
Installation side: at both sides
Installation side: front axle lower
Material: steel
Required amount: 2
Surface: galvanized
Thread length [mm]: 19,5
Weight, kg]: 0,66